Know the types of Polishing parquet

All polishes parquet, whether single or engineered, are prepared with different polishes from traditional to modern samples. Wood parquets are available in either raw or prefabricated forms. Raw parquets are usually first installed in the room by specialists and then polished and then polished.

On the other hand, the given polishing parquet does not need to be paid again. These parquets are much better than raw parquets because by looking at them, you know what your home parquet will look like in the end.

If you use raw parquet, you must seek the help of a specialist to install the parquet. In such cases, the specialist sands the unpolished floor and then prepares the parquet for polishing. At the end of the work, the parquet must be completely polished. So if you are planning to buy raw parquet for your home, pay full attention to the work process to achieve the desired result.

Among the types of polishing parquet that is available in the market, the following can be mentioned:



The use of wax in Polishing Parquet Finally, the parquet is relatively hard and strong. Polishing parquet using wax after sanding gives it a good and beautiful color that lasts for years. This type of payment requires a lot of care and maintenance. Wax is not stained or water-resistant. However, this type of payment has many fans.


Polishing parquet oil

In this type of polishing, which is usually done in the factory, two or three layers of oil are placed on the parquet surface. This type of payment is more suitable for humid or busy environments.


nail polish alcohol

In this type of polishing parquet, the floor is polished several times with varnish. Finally, the floor has a coating that protects it from the penetration of water and moisture, as well as stains.



Sometimes in the factory, the wood used to make parquet is discolored to give the parquet a light color. In this case, the color of the wood turns white. This makes the design and streaks of the wood boards more visible. Light white parquets illuminate the room.


In this type of polishing parquet, parquets come in different colors. For example, you can make it gray or even black. Of course, this type of payment is usually used to renovate parquets.


Use your brush

In this method, using a paintbrush, the wood veins are first painted. Then two coats of varnish are applied to make the wood texture shiny and light. This type of polishing parquet is mostly used to make the home decoration.


Grooved payment

This type of coating is usually used for engineered parquets and gives the parquet a natural look. In this method, the edges of the boards are shaved and made oblique. This type of payment is very popular and must be done in the factory.

Payment similar to the deck of a boat or ship

This type of payment is fashionable and is done these days for bathrooms and kitchens. Polishing parquet is done in such a way that it looks like the wood used on the deck of a ship. In this method, a kind of concrete or glue is poured between the boards to make them look like the deck boards.


Types of designs and patterns of parquet

In the parquet market, there are different designs and patterns, such as herringbone, V, mosaic, etc., where you can choose the type you want. These designs usually follow a variety of geometric patterns that are beautifully designed.

The herringbone design is more popular because of its zigzag lines. You can also choose a combination of different patterns.

Which parquet is suitable for small rooms?

Light-colored parquet makes small rooms look large and spacious. In addition, for small rooms, choosing the right design and pattern of parquet and its type can have a great impact on the appearance. Checkered patterns are ideal for very small rooms. Of course, checkered houses should not be too small, because they make the room look crowded.

Parquet's bone pattern is suitable for large rooms, and if there is little furniture in the room, this design will make the room look full.


Polishing parquet grooved or without groove
Each piece of parquet is called a parquet board. Parquet boards are laid in two ways with or without grooves during installation. Grooves or seams are one-millimeter V-shaped voids that are located in the cut-outs of parquet pieces.

Grooved parquets are very thick and have a very beautiful appearance geometrically.

Corrugated parquet is not suitable for high-rise environments. In this case, they will be damaged soon. It is also very difficult to clean the seams between the parquet pieces. These seams and grooves become dusty after a while.


What is the strength of parquet and Polishing parquet?

It is very important to pay attention to the strength and durability of the parquet. When buying a Polishing parquet, depending on your consumption and budget, you should choose the strongest type of parquet so that it does not disappear quickly. If you want to parquet the floor of a crowded room, you should pay attention to the type of wood and the thickness of the parquet.

Mosaic design parquets are 8 to 10 mm thick and these parquets can be sanded and polished 4 to 5 times.

There are also 14 to 23 mm thick rod design parquets on the market. Parquet boards can be sanded 5 to 7 times.

Prefabricated polishing parquet is also produced in two-layer or three-layer samples. Two-layer parquets are 10 to 16 mm thick, which is 10 to 25 mm thick in three-layer parquets.


Which parquet is strong?

Parquets made of hardwood are strong and durable. The wood of beech, oak, and jam trees are strong.

Jam wood is one of the hardest woods and parquets of this kind are very durable. Bamboo wood is also very durable and all items, including parquet made from this type of wood, remain healthy for years.

In addition to durable wood, the parquets themselves are also important in choosing durable parquets. Single-piece parquets are much more durable than laminated or prefabricated engineered parquets.

What are the advantages and disadvantages of Polishing wood parquet?

In general, wood parquet has advantages and, of course, disadvantages that you should be aware of before buying them.


1. Long-term investment

Some parquets can last up to 100 years. Therefore, if you choose the best type of parquet from the beginning, you will not have to repair or replace the parquet for at least the next 20 years.


2. Variety

As you can see in this article, the Polishing parquet is very diverse and everyone can find the type of parquet they want.


3. Quality

Wood parquets are better than vinyl parquets or even carpets and can be polished and rebuilt many times.


4. Easy care

Polishing wood parquet is easier to clean and easier to care for than other floors.


5. organic

Since these floors are made of wood and are of organic origin, they are a good choice for the environment.



1. Cost

Parquet is more expensive than other floors and therefore not all people can use it safely.


2. Termite attack

Polishing wood parquet is usually at risk from termite infestation. Termites usually destroy wood from within. Therefore, one must constantly beware of these destructive creatures.


3. Sensitive to moisture

Wood flooring will deteriorate very quickly in humid environments. In addition, strong detergents can not be used to wash them.


4. Scratch

Wooden floors are prone to scratches. Therefore, they must be taken care of carefully. They are also more likely to be stained. Therefore, people who have a child at home should be more careful about this type of parquet than anyone else.


5. Swell

Wood parquet swells and swells over time. Especially when liquid is poured on it. This swelling causes the edges of the parquet boards to break and fall off the ground.


Conclusion Polishing parquet

Given all the explanations provided in this article and the amount of budget, you can consider, buying your favorite parquet.


Post a Comment